MMX-PRESS

The modern new mixing system control MMX Control Profi from TROPPER, which is available in 9 languages: Backlit, bright 10 “color display (operating temperature -20 ° C to + 70 ° C) with robust keypad, equipped with numeric keypad and 16 function keys;

Software with its own SQL database for easy customer management of 10,000 customer addresses, recipe management, 15 components per recipe, printing a delivery note, batch storage, managing data on the operator panel and simple data exchange with a PC using a USB stick as well as via remote maintenance using a GSM module or conveniently from a notebook the cab.

Recipe control → printouts possible

For clear and accurate processing of recipes using a user-friendly interface.

Both drive options from TROPPER provide, due to the low maximum working revolutions of 1,600 rpm when sucking, for optimal performance and torque at low fuel consumption. Modification for plant oil is possible for both types!

With the smooth running Airblock you can count on a well-protected air-end with temperature monitoring.

Optional: TROPPER AIRBLOCK DUO POWER

The MEGA suction station for even more suction performance at low revs. Save fuel and spare the direct drive due to lower rpm despite higher performance.

The mill is standard equipped with 160 hardened metal hammers (with 1,1 m² filter surface) and therefore also well suited for special purposes such as grinding moist grain. (Grinds up to 35 t/h).

Filter exchange is easy to carry out.

In the case of the massive, hydraulically adjustable crusher the crushing performance and the crush quality are always the main priorities. The large 600 mm long crushing rollers with a diameter of 400 mm and the proven belt drive enable top throughput with all fodder ingredients. Simple crushing gap adjustment while running is a specialty of the TROPPER crusher.

Despite the strong magnetic force the magnetic separator can easily be taken out and wiped clean. Order number: ID 02499.

As an operator of mixing plants, you set great store by a quick and clean change of products. Hereby, you can rely on our long-time experience with pneumatic discharge. TROPPER MMX-Press have been drained, according to a simple and efficient system, since 1992 for a simple and effective system: Due to maintenance-free outlet plates, the best possible draining can be achieved without any complex mechanics at the bottom of the mixer drain! In combination with the standard hopper knocker (cleans the mixer wall) and the draining stop, you can achieve impressively clean results. You as customer supply high-quality compound - hence: mix quality - avoid loss!

With suction, elastic and mounted very low (optimal height for adding ingredients) with a table and a bag opener for small bags as well as a shaker for emptying the bags fully.

The special hydraulic full stream technology enables dust-reduced discharge of large amounts of material due to the 2 joints.

For complete discharge of the mixer contents and for continual throughput crushing (e.g. for biogas plants). When carrying out continual throughput crushing the crushed grain is guided through a rotary feeder.

Suction system with tubes, regulator and intake lance as well as oil tank (300 l to ca. 2,000 l) with counter (select amount). Figures are displayed on the weighing computer (MMX Control).

TROPPER sets high quality standards and has its processed frame components hot galvanized after they have been bevelled!

The complete internal coating of the aluminium hood with high quality sound insulation material enables on the one hand effective reduction of the operational noise and on the other hand easy access to the units due to the large cover.